This pressure washer hose is easy to maneuver. It is very flexible and lightweight. The outer part is strong and puncture resistant and doesn’t kink. All the ends are robust and quality thick real metal. This attaches without leaking at the ends with a strong connection. The high PSI handles my gas powered pressure washer.Trust you found this review honest and helpful:-)

This is a handy attachment for your pressure washer for tasks like cleaning the magnesium chloride off the underside of your car, or cleaning surfaces.The kit comes with the extension wands, including the angled one, so that you can reach underneath a car with no trouble. The wheels are like rollerblade wheels, and make maneuvering the unit around quite easy. And then the attachment has a simple swivel feature, so that you can set the unit to any angle that you like by pulling a spring loaded pin, rotating it to where you want, and then releasing the pin. At that point, it is locked into that position.This is great for doing things like cleaning your garage floor, etc. However, since the flow is split between four spray heads, if you want to do something like strip a deck with this unit, make sure your pressure washer is pretty beefy. I ran it with an 1800 psi pressure washer, and it would probably not be forceful enough for stripping a deck. You'd probably want to use a 3500-4000 psi unit for heavy duty work like that.

This is a very solidly made, mostly metal, pressure washer attachment. I was really impressed by the quality of all the pieces, especially the adapter that allows the arm to be locked in multiple positions. It's heavy brass with a metal locking pin - no flimsy stamped metal or brittle plastic here! The nozzles are all brass, too. Wheels are heavy duty plastic and even include skate-style ball bearings for easy rolling.This attachment can be used two ways: Spraying up as an underbody flush for vehicles, or spraying down as a water broom for large surfaces. I'll use it much more frequently for cleaning my sidewalk, patio and driveway than for washing underneath my car. The 4 wide fan pattern nozzles spray fairly evenly as it rolls along, leaving only minimal dirt stripes that disappear with a couple passes over the area. It's a much faster and better option than using a single fan nozzle on a wand, plus with the wheels it's a lot easier on the shoulders and arms.The product includes 3 extensions with universal quick couplings - 2 straight and 1 angled. I found that just the angle extension was enough for rolling along surfaces, but the whole set of them would be good for reaching high areas when washing walls, etc, or under large vehicles.One puzzler: The box included a big bag of ball head sewing pins. I assume those are to unclog nozzles if they fill up with sediment - not real likely as most pressure washers include filter screens to protect the pump.A great simple addition to a pressure washer, ideal for large flat surfaces.

This tool is excellent for cleaning both my driveway and the undercarriage of my vehicle. The pressure washer attachment has proven to be highly effective. In my experience, it cleaned my driveway thoroughly, making the task much easier and sparing me from physical strain.Given its affordable price, I highly recommend this pressure washer tool for its user-friendliness and exceptional value.

The attachment set came in a brown box inside which I found 1 pressure wash attachment, 3 pressure wash pipes, 1 pair of safety goggles, and 1 box of shirt pins.There are 4 nozzles and 2 wheels on the attachment. The intake can be adjusted to 90, 180 and 270 degrees. All pipes and attachment are made of metal with the exception of the 2 wheels which are made of rubber and plastic. The build quality is very good.The pair of safety goggles is necessary considering that the attachment allows high pressure water to go upwards and could easily hit human eyes.I am not sure about the use of the included box of shirt pins. My guess is to use them to unclog the nozzles?

My wand came with two blue nozzles and missing the black nozzle. I tried to get the black nozzle sent to me but my only option was to return the whole package. I ended up buying a set of two black nozzles. Very good wand that works great and seems like it will last if not banged around.

So I had burnt my original hose when it rubbed up against the exhaust of my pressure washer. I saw this replacement online and was excited to get it.So far I am liking this hose. It's more flexible that my original, but it still feels very durable. I'm actually able to bundle it up and put it away a lot neater than when I had my original and the fittings are an exact fit for my pressure washer and gun.If I ever need a replacement, I'll definitely purchase again.

This POHIR Pressure Washer Gun is an exceptional short gun pressure washer attachment. I have several short and extended (stock/barrel) pressure washer guns and found that I prefer the short gun washers because they are easier for me to hold and operate with. Most pressure washer machines come standard with an extended gun washer/wand that one may find is heavy, leaks, not balanced, hard trigger pull, and not up to the quality of a premium aftermarket washer guns.Upgrades are always personal choice and I have already replaced pressure washer hoses with the POHIR branded pressure hoses (100 ft. & 50ft.) so when the opportunity became available to order the POHIR Pressure Washer (short gun) I was expecting a premium upgrade to the washer wands that I have used in the past. If one was a gun enthusiast you know there are many diverse types of guns (shotguns, pistols), they all do the same when trigger is pulled however one finds not all guns look, feel, handle, weigh or operate exactly alike and this is true with pressure washer guns.The POHIR Pressure washer gun reminds me of the pistol that rhymes with Clock. It is a short gun (pistol), light weight, has a great trigger pull, well balanced and affordable when compared to other top tier name branded pressure washer accessory sellers’ guns. Rated at 3600 PSI (pounds per square inch) maximum pressure this POHIR Washer Gun comes with a variety of fittings that will assure proper hose connections as warranted. Fittings included are M22-15MM, M22-14MM, and a quick connect 3/8” fitting also included is a quick connect Extension Wand (I will never use but nice to have if ever needed), and 7 different colored easy connect spray nozzles (with bonus nozzle holder included). I can never remember what recommendations are for each of the color spray nozzles - POHIR product page highlights the following for nozzle usage reference.0° RED Nozzle - cleans high areas or areas hard-to-reach.15° YELLOW Nozzle - cleans hard surfaces like concrete.25° GREEN Nozzle- cleans fences, wood, and painted surfaces.40° WHITE Nozzle - cleans vehicles.BLACK & PINK Nozzles - soap stream tipsBLUE Nozzle – rinse tipThis POHIR pressure washer short gun comes with a 1/4-inch standard quick connector tip used to connect all standard size accessories one would be using with this short gun like spray tip nozzles, foam cannons, couplers, and undercarriage cleaners. I really like the feel and balance of this pressure washer gun and it does match well with my POHIR pressure washer hoses. As I mentioned earlier, I have several aftermarket types of pressure washer guns with one priced 3x more than the POHIR – If I had to make a choice this new POHIR Short (Pistol like) Pressure Washer Gun has become my new favorite.Recommend Purchase/ Buy if one is looking for a great well branded aftermarket short gun (pistol like) pressure washer gun that is lighter and easier to use and operate than most standard pressure washer guns.

I don't think you can go wrong with a back up hose or in this case a better hose than what came with my newest pressure washer. I have three pressure washers, one electric and two different gas powered units for different strength jobs. I have on occasion had hoses bubble out on me, or ones that are so rigid they are hard to move and use or get pulled into the motor and melted. This hose hasn't had any of these issues.The length is great for what I was looking for. It is rigid enough that it doesn't pinch when bent (see video) but also flexible enough that it moves and bends and doesn't just whip around when using it. It comes with quick hose attachments which are always great and make it much easier to set up or break down and store, really a must when dealing with longer hose lengths. It also has an hose extender part and extra rubber washers which is always nice to have, just make sure to grease you fittings when using and you shouldn't need them for a while. I don't think you can go wrong with this hose if you are looking for a replacement or if you are looking for an upgrade. Hope this helps.

Quality of nozzles are very good.The range of nozzle sizes was exactly what I needed to supplement those received with pressure washer.They are heavy weight good quality material.The pink and blue, these easily hit the upper sides of my house when I washed it, like a soft wash, so not high pressure, but great range.The angle adapter is really nice too.With this kit is so much easier to spray above and below things, not to mention overhead vertical things.Overall, sturdy product and easy to use.

This pivoting coupler comes in a plain cardboard box and inside you’ll find the coupler and 7 adaptors which are stored on a hanger. The pivoting coupler is made from brass and can pivot 240 degrees. This helps to wash under things like the car or spray upwards to clean the upper part of the inside your rims or wheel arches. It doesn’t take any effort to change the direction and it doesn’t leak along the pivot point so has a good seal. It does smell of brass and you get the smell on your hands which doesn’t want to go away which is annoying. The included nozzles come on their own plastic mount so are kept neat and tidy. The plastic mount comes with a carabiner so it can be attached to anything to keep your tips in reach when you need them. The tips give a variety of sprays from a direct, powerful thin stream to a wide jet for rinsing down so you have a good variety to be handy for most jobs you’ll encounter. They are easy to attach to the pivot mount by pulling back on the collar, sliding the nozzle into it, and while pushing in on the nozzle, push the collar forward and this will lock the nozzle into place. Really easy to do and the removal is as simple as pulling the collar back and pulling out the nozzle. A really handy set of nozzles to have for your pressure washer as they will suit most of the jobs you’d need a pressure washer for. The pivoting couple is one of those things you didn’t know you needed until you used one and it’s so much easy to clean areas of my car that I couldn’t get to before…

This pivoting coupler comes in a plain cardboard box and inside you’ll find the coupler and 7 adaptors which are stored on a hanger. The pivoting coupler is made from brass and can pivot 240 degrees. This helps to wash under things like the car or spray upwards to clean the upper part of the inside your rims or wheel arches. It doesn’t take any effort to change the direction and it doesn’t leak along the pivot point so has a good seal. It does smell of brass and you get the smell on your hands which doesn’t want to go away which is annoying. The included nozzles come on their own plastic mount so are kept neat and tidy. The plastic mount comes with a carabiner so it can be attached to anything to keep your tips in reach when you need them. The tips give a variety of sprays from a direct, powerful thin stream to a wide jet for rinsing down so you have a good variety to be handy for most jobs you’ll encounter. They are easy to attach to the pivot mount by pulling back on the collar, sliding the nozzle into it, and while pushing in on the nozzle, push the collar forward and this will lock the nozzle into place. Really easy to do and the removal is as simple as pulling the collar back and pulling out the nozzle. A really handy set of nozzles to have for your pressure washer as they will suit most of the jobs you’d need a pressure washer for. The pivoting couple is one of those things you didn’t know you needed until you used one and it’s so much easy to clean areas of my car that I couldn’t get to before…

I thought this might be an interesting novelty, but it's really a nicely made and useful pressure-washer accessory. Very sturdy in construction, there's a positive click for each of the preset angles but changing angles is quick and easy, requiring no particular effort. I found it leak-free, no matter what angle I set it to. There's a good range of spray nozzles, a slightly broader range than is often provided, with the extra nozzles being several different diameter 0° spray holes. There's also a nicely formed plastic holder for all the nozzles, which holds them securely but leaving them still easy to retrieve and replace.I think it's a bit on the pricey side, so I've docked a star off my rating, but the product itself is excellent, and is better than I expected. Where it exceeds my expectations is that it was absolutely leak-free, but also the smoothness of the angle adjustment was better than expected. It's very nicely made. Pricey to buy for yourself, but would make quite a nice present for someone.

I like how easy it is to switch to different water settings. My pressure washer is 2030 psi and it worked fine.